# How do you calculate engine requirements?

Contents

## How is engine capacity calculated?

Calculation of motor capacity

1. n = i x n1. n : Motor speed (min–1) n1 : Speed of gear output shaft or pulley etc. attached to it. i : Reduction ratio of gear head (e.g. i = 20 for 1/20)
2. 1) Set the suitable SPEED.
3. 2) Voltage calculation.
4. 3) Torque measurement.
5. 4) Set the speed torque.

## How much CFM do I need for engine?

The formula for calculating how much CFM (cubic feet per minute) your engine requires is: CFM = Cubic Inches x RPM x Volumetric Efficiency ÷ 3456. Any ordinary stock engine will have a volumetric efficiency of about 80%.

## How do you calculate the mechanical load of a motor?

In our example input electrical power of the motor is 0.22 A x 6 V = 1.32 W, output mechanical power is 1000 rpm x 2 x 3.14 x 0.00126 N•m /60 = 0.132 W. Motor torque changes with the speed. At no load you have maximum speed and zero torque. Load adds mechanical resistance.

## How do you calculate torque needed?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

IT IS INTERESTING:  Best answer: Can you weld a chrome bumper?

## How is motor power calculated?

Calculate the power the motor consumes while in operation. The equation is W = AV(sqrt 3) where A is amperes, V is volts, and sqrt 3 is the square root of 33 (about 1.73). W is the power consumption in watts. For example, if the electric motor uses 50 amps at 240 volts, the wattage is 50 x 240 x 1.73, or 20,760 watts.

## How do you calculate the power developed by the engine?

The power developed by an engine at the output shaft is called brake power and is given by Power = NT/60,000 in kW where T= torque in Nm = WR W = 9.81 * Net mass applied in kg.

## How do you calculate motor horsepower?

The quickest method to closely estimate motor horsepower is to use a digital clamp meter to measure current and voltage to the motor, and then perform a simple calculation. Use this formula to estimate motor horsepower. Horsepower(hp)= Voltage x Amperage x % EFF x power factor x 1.73/746.

## How do you calculate motor horsepower from CFM?

If you know how much horsepower your motor makes, you can estimate its air flow in cubic feet per minute (CFM). For example, a 1,600 cc motor in a good state of tune requires about 54 cubic feet per minute to make 78 horsepower.

## Is 600 cfm carb big enough?

A 600-cfm carburetor may perform quite well on a stock 350 Chevy. However, the minute you start weaving in power adders like a hotter cam, a dual-plane performance intake manifold, and aluminum heads you’re going to need 700-750 cfm.