How low can you discharge a 12 volt battery?
No 12-volt battery will remain at over 14 volts for more than seconds unless it’s being charged. The lowest limit is 10.5 volts (used in testing) and obviously unsatisfactory in practical use. Experienced RVers try to use no more than 20% to 50% of the energy available in a battery before recharging.
Is full discharge bad for battery?
Although partial-discharge cycles can number in the thousands, keeping the battery in a fully charged state also shortens battery life. Full discharge cycles (down to 2.5 V or 3 V, depending on chemistry) should be avoided if possible.
At what voltage is a 12v battery 50% discharged?
12.2 volts is a 50% discharge on a standard 12 volt battery. Gel batteries are a little different and have a voltage of around 12.85 when fully charged. When discharged to 50% the voltage should read around 12.35. AGM batteries will be around 12.8 volts when fully charged.
How do you calculate battery discharge?
In this case, the discharge rate is given by the battery capacity (in Ah) divided by the number of hours it takes to charge/discharge the battery. For example, a battery capacity of 500 Ah that is theoretically discharged to its cut-off voltage in 20 hours will have a discharge rate of 500 Ah/20 h = 25 A.
What battery can be fully discharged?
The lifespan of your battery will be moderately affected if it remains within this voltage range for extended periods of time. 12.0 volts or below – At 12.0 volts your battery is considered to be fully discharged or ‘flat’ and should be recharged as soon as possible.
What is maximum discharge current?
“Maximum Continuous Discharge Current – The maximum current at which the battery can be discharged continuously. This limit is usually defined by the battery manufacturer in order to prevent excessive discharge rates that would damage the battery or reduce its capacity.
How do you discharge a 12 volt battery?
Specifically, if you want to fully discharge a typical car battery (12V, 60 A hr), all you need is a 20 ohm, 10 W resistor (or equivalent), and connect it across the battery terminals. Leave it connected for about 4 days, and with a voltmeter verify that the voltage is zero.
Is 13 volts a good battery?
Check the reading. A fully charged battery will typically display a voltmeter reading of about 12.6 to 12.8 volts. If your voltmeter is showing a voltage anywhere between 12.4 and 12.8, that means your battery is in good shape. Any voltage above 12.9 volts is a good indicator that your battery has excessive voltage.