Your question: How do you test a car window switch?

How can you tell if a window switch is bad?

To test the window switch you will need to use a voltmeter and ohmmeter.

  1. Remove the faulty window switch from the door. …
  2. Turn the switch to the “open” position.
  3. Attach the voltmeter to the switch plug and test to see if there are 12 volts coming from terminal 4 to the ground and from terminal 5 to the ground.

How do I know if my power window relay is bad?

If the power window relay is bad, neither window will move. So, if the problem is only one one side, the relay is good. If you suspect that the power window relay is bad, you can remove the relay and jumper terminals 30 and 87 to power the window motors.

How do you fix a car window switch?

Replace power window switch in 6 easy steps

  1. Step 1: Buy a replacement switch. …
  2. Step 2: Pull out the panel. …
  3. Step 3: Remove electrics. …
  4. Step 4: Replace with new switch. …
  5. Step 5: Fix the panel back. …
  6. Step 6: Check now and it should be functioning.

Does each power window have its own fuse?

Check the fuse

Other cars have individual fuses for each window motor so failure will only affect the one window. In some cars the fuse is in the main fusebox but many makers use in-line fuses so check with your manual to find where the fuse is and replace it if blown. … Then test the window.

IT IS INTERESTING:  How long does it take a technician to replace a windshield?

Can a power window switch be repaired?

In some cases, a switch connection can be repaired. Our technicians can get into the switch pack, remove the springs and clean or replace the broken connections. When this happens we can often save our customers a bundle, but we always prepare you to replace the switch at the same time.